battery charger, car battery charger, lead acid battery charger, lipo charger, li-ion battery charger, nimh battery charger

G60-12A/N Lead-acid Charger for 12V Pb-Acid/AGM/GEL/VRLA/WET battery

  • Specification
  • Input: 100~240V
  • Output: 13.8V 3.3A
  • Charge Process: Recover、CC、CV(H)、Floating(Four stages)
  • Charger Indicator: With 4 LEDs Battery Meter,20%~100%
  • Output Protections: OVP、OCP、Shorted、Reversed
  • Safety Approval: CCC cTUVus FCC KC
  • Size: 120 x 67 x 41mm/270g
  • Industry: Power Tools、Security System
G60-12A/N Lead-acid Charger for 12V Pb-Acid/AGM/GEL/VRLA/WET battery

G60-12A/N13.8V 3.3A Pb-Acid  Battery Charger

Item Specification Remark
1.Input
Rating input voltage   100~240Vac  50/60Hz  
Input voltage range  90~264Vac   
Rating input current  1.0Arms Input:100V    Output:Full load
Max input power  60W Input:100V    Output:Full load
2.Output
No load output voltage DC 2.37V Detection of battery voltage > 3V , start charging
Output voltage range DC10.0~14.7V  
Suit with battery type 12V  Pb-Acid  battery  
Charging current  3.3A ±10%  
Charging voltage  DC14.7V ±0.3V When the battery is vulcanized, the voltage rises to 18V to repair the battery
Floating charge voltage DC13.2-13.8V  
Charge-end current 0.6A±10%  
Timer  >14V,Enter floating charge after 3 hours  
Max output power 48.51W  
Ripple voltage 147mV Full load
Power LED Red Power on
Charging LED All off No battery
All on  Finished
All flashing Error
Flashing one by one Charging
Shorted   Yes  
Reversed Yes  
Efficiency 82% Full load @220V
3.Environment
Operate temperature  -10 ~ +40  
Operate humidity < +90% Relative humidity
Storage temperature  -40 ~ +70  
Storage humidity 0 ~ +95% Relative humidity
Cooling Natural  
Vibration resistance 5MM/50HZ/600S Non-operating condition
Impact resistance 1 meter drop test 3 times Non-operating condition
4.Mechanical
Weight 270g  
Size 120X67X41MM Casing only
Connector Refer to order  
5.Safety 
Max. temperature rise < 40 on casing  
Safety approval CE/UL/PSE/SAA/FCC/CCC  
MTBF 30000H  
ESD 8.0KV  
Hi-Pot Insulation i/p to o/p: 3000V (1 min)  
Top
全民彩开奖 诚信网投登陆 诚信网投投注 创世彩票诚信网投开奖 159彩票 全民彩注册 诚信网投是真的吗 全民彩注册 山东群英会走势图表 创世彩票是真的吗